SCSI Driver and device firmware test V3.02 ½ 2014-2026 Uwe Seimet SCSI initiator ID in NVRAM is 7 SCSI initiator identification is enabled Found SCSI Driver version 1.01 Available buses: ID: 0 Name: 'Atari ACSI' Maximum transfer length: 65536 ($10000) Supported SCSI Driver features on bus level: - ID: 1 Name: 'Atari SCSI' Maximum transfer length: 268435456 ($10000000) Supported SCSI Driver features on bus level: Arbitration All SCSI commands Target control 32 LUNs ID: 2 Name: 'Atari IDE' Maximum transfer length: 130560 ($1FE00) Supported SCSI Driver features on bus level: All SCSI commands ID: 30 Name: 'Linux SCSI (Bus A)' Maximum transfer length: 65536 ($10000) Supported SCSI Driver features on bus level: All SCSI commands ID: 31 Name: 'Linux SCSI (Bus B)' Maximum transfer length: 65536 ($10000) Supported SCSI Driver features on bus level: All SCSI commands Testing bus 2 'Atari IDE', device 0, LUN 0 TEST UNIT READY INQUIRY Calling with valid parameters Raw data: 00:00:05:02:1f:00:00:00:48:61:74:61:72:69:20:20 49:44:45:20:64:69:73:6b:20:31:35:4d:20:20:20:20 31:2e:30:20 Device type: Direct Access Device name: 'Hatari IDE disk 15M ' Firmware revision: '1.0 ' Removable media support: No Linked command support: No Relative addressing support: No Tagged command queuing support: No Synchronous data transfer support: No 16-bit wide data transfer support: No 32-bit wide data transfer support: No RESET condition behavior: Hard RESET SCSI/SPC version: SPC-3 Response data format: SCSI-2 Additional length: $1F Calling with non-existing LUN 1 Testing with requested byte count of 10 REQUEST SENSE Calling REQUEST SENSE for existing LUN 0 Calling REQUEST SENSE for non-existing LUN 1 Calling REQUEST SENSE again for existing LUN 0 Testing SCSI Driver sense buffer handling READ CAPACITY Reading capacity with READ CAPACITY (10) Maximum block number: 30719 Block size: 512 Reading capacity with READ CAPACITY (16) Maximum block number hi: 0, maximum block number lo: 30719 Maximum block number: 30719 Block size: 512 Logical sectors per physical sector: Unknown (1 or more) Reading last block (30719) Trying to read last block + 1 (30720) READ Reading block 0 with READ (6) Reading block 0 with READ (10) Reading block 0 with READ (12) READ (12) is not supported by device Reading block 0 with READ (16) Trying to read IDE block 281474976710656 with READ (16) Reading block 0 to odd address with READ (6) Trying to read block 0 from non-existing LUN 1 SEEK Seeking block 0 with SEEK (6) SEEK (6) is not supported by device Seeking block 0 with SEEK (10) SEEK (10) is not supported by device MODE SENSE Reading all mode pages with MODE SENSE (6) MODE SENSE (6) is not supported by device Reading all mode pages with MODE SENSE (10) MODE SENSE (10) is not supported by device MODE SELECT Testing MODE SELECT (6) with empty parameter list MODE SELECT (6) is not supported by device Testing MODE SELECT (10) with empty parameter list MODE SELECT (10) is not supported by device READ LONG Reading 0 bytes of sector 0 with READ LONG (10) READ LONG (10) is not supported by device READ FORMAT CAPACITIES READ FORMAT CAPACITIES is not supported by device GET CONFIGURATION GET CONFIGURATION is not supported by device Test result summary: SCSI Driver bugs: 0, SCSI compatibility bugs: 0 Testing bus 30 Linux SCSI (Bus A)', device 7 Supported SCSI Driver features on device level: All SCSI commands SCSI Driver CheckDev() Testing with valid bus ID 30 Testing with invalid bus ID 32 SCSI Driver Open/Close() Available handles for bus 30: 32 REPORT LUNS Number of LUNs: 1 LUN list: 0 Testing bus 30 'Linux SCSI (Bus A)', device 7, LUN 0 TEST UNIT READY INQUIRY Calling with valid parameters Raw data: 00:00:06:12:5b:00:00:00:4a:4d:69:63:72:6f:6e:20 54:65:63:68:20:20:20:20:20:20:20:20:20:20:20:20 30:32:30:34:12:00:00:00:24:00:b9:5e:01:00:03:b4 00:00:00:00:00:00:00:01:00:00:00:1e:00:00:00:00 00:00:00:00:01:00:1f:12:01:6e:74:54:01:6e:b9:5e 01:6e:b9:60:20:ff:ff:c6:01:6e:0a:42:00:00:00:00 Device type: Direct Access Device name: 'JMicron Tech ' Firmware revision: '0204' Removable media support: No Linked command support: No Relative addressing support: No Tagged command queuing support: No Synchronous data transfer support: No 16-bit wide data transfer support: No 32-bit wide data transfer support: No RESET condition behavior: Hard RESET SCSI/SPC version: SPC-4 Response data format: SCSI-2 Additional length: $5B Calling with non-existing LUN 1 Testing with requested byte count of 10 REQUEST SENSE Calling REQUEST SENSE for existing LUN 0 Calling REQUEST SENSE for non-existing LUN 1 Calling REQUEST SENSE again for existing LUN 0 READ CAPACITY Reading capacity with READ CAPACITY (10) Maximum block number: 1000215215 Block size: 512 Reading capacity with READ CAPACITY (16) Maximum block number hi: 0, maximum block number lo: 1000215215 Maximum block number: 1000215215 Block size: 512 Logical sectors per physical sector: 8 Reading last block (1000215215) Trying to read last block + 1 (1000215216) READ Reading block 0 with READ (6) Reading block 0 with READ (10) Reading block 0 with READ (12) Reading block 0 with READ (16) Reading block 0 to odd address with READ (6) Trying to read block 0 from non-existing LUN 1 SEEK Seeking block 0 with SEEK (6) SEEK (6) is not supported by device Seeking block 0 with SEEK (10) MODE SENSE Reading all mode pages with MODE SENSE (6) Received 75 data bytes Available pages list: 1, 8, 26 Page 1: Read-write error recovery page (current, not savable) Raw data: 01:0a:c0:00:00:00:00:00:00:00:00:00 Page size: 10 bytes Disable correction (DCR): 0 Disable transfer on error (DTE): 0 Post error (PER): 0 Enable early recovery (EER): 0 Read continuous (RC): 0 Transfer block (TB): 0 Automatic read reallocation (ARRE): 1 Automatic write reallocation (AWRE): 1 Read retry count: 0 Correction span: 0 Head offset count: 0 Data strobe offset count: 0 Write retry count: 0 Recovery time limit: 0 ms Page 8: Caching page (current, not savable) Raw data: 08:12:14:00:ff:ff:00:00:ff:ff:ff:ff:00:ff:00:00 00:00:00:00 Page size: 18 bytes Read cache disable (RCD): 0 Write cache enable (WCE): 1 Multiplication factor (MF): 0 Write retention priority: 0 Demand read retention priority: 0 Disable pre-fetch transfer length: -1 Minimum pre-fetch: 0 Maxium pre-fetch: -1 Maximum pre-fetch ceiling: -1 Page 26: Unknown page (current, savable) Raw data: 9a:26:00:00:00:00:00:00:00:00:00:00:00:00:00:00 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 00:00:00:00:00:00:00:00 Page size: 38 bytes Reading all mode pages with MODE SENSE (10) Received 78 data bytes MODE SENSE (6) and MODE SENSE (10) page data are identical MODE SELECT Testing MODE SELECT (6) with empty parameter list Testing MODE SELECT (10) with empty parameter list READ LONG Reading 0 bytes of sector 0 with READ LONG (10) READ LONG (10) is not supported by device READ FORMAT CAPACITIES READ FORMAT CAPACITIES is not supported by device GET CONFIGURATION GET CONFIGURATION is not supported by device Test result summary: SCSI Driver specification violations: 0, SCSI standard violations: 0